Skip to content


Custom Firehouse Kitchen Table – Elkhart, Indiana FD Stations 1 & 4

No comments

Cory Wise sent in two tables from the Elkhart Fire Department (Indiana). This first one sits at firehouse #4. Paramedic Rick Becola painted the top of the table freehand.

View other custom firehouse kitchen tables here. Submit your custom table to firecritic@firecritic.com

The table below sits at the Central Firehouse in Elkhart. A-shift built the table and the art work was done by Kelby Love. Love is a well known artist from the area.


Custom Firehouse Kitchen Table – Fairfield Township, Ohio

3 comments

Jason Agoston sent this table in from Engine 212 and Medic 212 “House on the Hill” in Fairfield Township, Butler County, Ohio. They claim this might be the heaviest table in any firehouse. Jason and two other firefighters built the table themselves. It measures 8′x4′, with a 2′x4′ frame, sheet of plywood covered by oak flooring. The base is two Darling hydrants. They then coated it with the same stuff they put on basketball courts.

Across the top of the table it reads Engine 212/ “Since 1947″/ Medic 212.

Thanks for sending it in Jason!

View other custom firehouse kitchen tables here. Submit your custom table to firecritic@firecritic.com

Custom Firehouse Kitchen Table – Carmel, Indiana

No comments

Chuck Plumer, one of the two readers of this site, sent in these photos of their kitchen table almost 2 months ago. Unfortunately, Chuck had to wait until today to see the handy-work here on The Fire Critic.

This custom firehouse kitchen table belongs in station 45 of the Carmel FD in Carmel, Indiana. Can this be the same Carmel FD I wrote about in this post of a Dunkin Donuts burning down?

Chuck tells us that the two tables were made from reclaimed bowling lanes. Each table is 42″ wide by 10′ long. The maltese on the legs were cut out of 1/4″ plate steel. All of the work was completed by the firefighters on all three shifts. Great work Brothers. Keep up the PRIDE and stay safe.

View other custom firehouse kitchen tables here. Submit your custom table to firecritic@firecritic.com

Monroe, NJ Engine Company 5 Custom Kitchen Table

1 comment
Custom Kitchen Table - Station 23 Engine Co. 5 Monroe, NJ
 
Check out this custom kitchen table built by the firefighters at Engine Company 5 in Monroe Township, NJ. Firefighter Rob Meyer sent this in. Great looking table guys! Something to be very proud of! Keep up the great work, enjoy the comradarie, and hope that more hot meals are eaten on that table than cold ones!
 
If you have a custom kitchen table or other custom piece you want to show off, send it in to me!
 
About the Table:
Size:4ft x 10ft

Construction Materials:
3/4″ Natural Oak Planks w/ 3/4 ply 4×10 Underlay
All Oak Banding/Clamshell
3″ Hose w/Couplings Wrapped Over PVC Filled With Cement
Custom Vinyl Decals
Custom Brass Plaques
Bar Top Epoxy
Fire Hydrant
Rope Light Kit

Engine Co. 5 in Monroe Twp (Middlesex) is a 24/7 Career Station that staffs 4 personnel around the clock. (1Lt, 3F/F’s)Station 23-A is responsible primarily as an Engine, but also houses a Medium Duty Rescue as well as a Brush Unit w/Special Ops trailer.

Paid for and constructed by the members of Engine Co. 5, this 4×10 table is oak throughout. Front and center is the Engine Co. patch. Surrounding that are custom brass plaques with the names of each member broken down by shift at the time of purchase and construction. The legs are fashioned as hose lengths with male and female couplings on either end. The center support, obviously, is a hydrant stripped and repainted. For a finishing touch a light kit was added between the banding and the clam shell, as well as underneath the hydrant. The legs unscrew from the table in the event it needs to be moved. This table weighs a TON even without the legs.

This project spurred the idea to create a “mini-me” coffee table (sans plaques) for the upstairs lounge which is currently still under construction. The Lounge itself is under small renovation and customization, as well as an Assignment Board being planned as a near future project.

 

Custom Firehouse Kitchen Table at #3…Where the Fire Critic Eats!

5 comments

I have great news everyone…Roanoke Fire-EMS firehouse #3 has completed their custom kitchen table. We began dreaming up this table about a year and a half ago…and started building it about 9 months ago. (photos by Drew Abel)

Everything changed everyday we came to work…the design and materials we were going to use. Feelings were hurt, rank pulled, and egos crushed. We let it all hang out in the bay at #3 and finally got the job done. There is nothing like a little creativity to bring all the guys together!

View some other customizations we have done at our firehouse here

View some other custom kitchen tables we have had on FireCritic.com here, here,and here.

Ok, the details…

The top

There she is! All 400 lbs. of her (just a guess)

  • Constructed of untreated 4×4′s (pine or douglas fir)
  • They are glued and have 4 threaded rods going through them from side to side
  • The top was sanded by a floor refinisher (Captain Wines hooked us up)
  • The apron of the top is cherry lumber that looked like hell when we got it. It was free from Lucas, but the planer it burned up was not
  • The middle of the apron is purpleheart…a little bit of contrast. We also plugged the screw holes with purpleheart and it really sets it off
  • We stained the entire top with “early American” stain…I think, although it might have been “special walnut”
  • We applied 6 gallons of clear epoxy bartop to the tabletop. Two gallons at a time…$125 for 2 gallons…this hurt the wallet!

Lucas welded "3A 2010" in the leg bracket...we started it last year!

The legs

  • Firefighter David Lucas fabricated the brackets from steel. It is one piece with 4 holes to accept the legs. There is a long stabilization rod between the two sets of leg mounts.
  • The legs are also untreated 4×4′s
  • The two sets of legs are connected with a 4×4 brace that is mortise and tenoned. Great craftsmanship, but you can’t see it!
  • We simply polyurethaned the legs…That’s how we roll!

A #3 coin flush mounted in the side. Notice the purpleheart!

The details

  • We did a cherry inlay of a 3 in the middle of the table. We decided to do this instead of any graphics. While the inlay is not perfect, the table looks great. I am happy with it.
  • We flush mounted one of our station coins in the side of the table right in the purpleheart. It sets it off.
  • Lucas also added “3A 2010″ in the metal on the brackets. We started it last year, and 3A built it entirely.

The cherry inlay is not perfect...but I think it looks better than any graphic

Overall, the table is simplistic. We intended it to be that instead of being over the top or gaudy. In the end, we are happy with the finished product.

It is easily the best looking table in a Roanoke firehouse…although I might be a little biased.

Special thanks to Drew Abel’s patience, David Lucas’s metal working skills and cherry lumber from the barn, Eric Mulford’s help, Captain Craft’s green paint that we promptly painted over, the occasional presence of Jason Gardner, Captain Wines for getting the table sanded, Aaron Murray’s donation, the gift card from Scooter, and some assistance from Captain Weeks when we applied the bartop finish. In addition to all of that, since completion several other guys from #3 have helped reimburse the Bank of Fleitz for paying for this monstrosity.

  • Lumber $240
  • 6 gallons of epoxy bartop $390
  • Planer we burned up $300
  • Miscellaneous purchases $100
  • The look on Captain Weeks face when we told him that ours was 100% built by firefighters in a firehouse and his wasn’t…PRICELESS

Turning a Fire Station into a Firehouse

2 comments

This day in age, new fire stations seem more like the inside of a school or jail than a firehouse from back in the day…Wood trim, wood floors, two-story, cozy and warm firehouses have been replaced with concrete or tile floors, cinder-block walls, single story, institutionalized fire stations. My crew has found a way to make our fire station more like a firehouse…through our own hard work and dedication.

Bottle rack for spare O2 and SCBA bottles mounted on the wall in the bay

I am not complaining…The first firehouse I worked in was built in 1929. It was brick with plaster walls, wood floor, steam radiators that clanged all night, terrazzo floors (even in the bay, and one remaining pole that went from the hallway upstairs to right between the fire engine and ambulance in the bay below. The largest room was the bunkroom where everyone had their own bed (at one time that probably meant 5 or 6 men per truck per shift when it housed an engine and ladder). That station was recently closed and consolidated. The ambulance became medic 5…the engine no longer exists. Another engine company bit the dust…and it was one of the busiest in the City.

Our workbench...this thing is solid and has gotten plenty of use already!

Now I work at Station 3. The station is 2 years old and replaced station 10 which was located at the airport. The suppression units (engine and medic) went to station3, the ARFF trucks remained.

Station 3 has stained and epoxied concrete floors, cinder block walls…and up until about a year ago NO history or character.

A little over a year ago I got moved out here with a brand new crew. My Captain was promoted from a different shift and joined us on A-shift. Two firefighters had been here, another came from a different station, and then there is the

Custom Run Board that hangs behind our kitchen table.

boomerang Lieutenant…He was promoted, but due to a simple addition error at Fire Administration they took his bugle away. He still moved here as a firefighter and they moved me to be the Lieutenant.

We all agreed that the fire station needed to be turned into a FIREHOUSE. After all, we were set to spend A LOT of time at the station and wanted it to be more like a home…a firehouse!

Many firefighters across the Nation and beyond have found ways of doing this. Mascots, Wall Shields, Custom Kitchen Tables, and other customizations around the firehouse to make it feel like a home.

This reclaimed solid oak table was found on the side of the road. We hacked the legs off and painted the original RFD logo from Roanoke in the early 1900's.

We are no different. Throughout the past year, we have been busy. We have spent a lot of our time when we aren’t cooking, training, and running calls we have been setting up the wood shop in the bay and doing work!

We are still working on our custom kitchen table. We have been plagued by decisions on what to do and how to do it throughout the project. We have been working on our kitchen table for about 6 months. The good news is that it is nearing completion. We still have to build the base, do some finish sanding, mount a coin and plaque, stain and epoxy it…but we are getting their. We opted to not do the typical tongue and groove top and went with pine 4×4′s with a cherry edge band and cherry inlay. There is also a purpleheart piece in the middle of each side. The top sits on a painted metal frame that the base will attach to.

I think it is important for firefighters to take pride in their stations. Whether they know how to knit, woodwork, metalwork, or paint they can chip in to customize the station and turn it into a firehouse. I wonder what this place will look like in 50 years when I am long gone!

Our custom kitchen table still in the works...We hope to finish it before we retire!

With the exception of the workbench, the firefighters at my station have paid for all of the projects. The FD chipped in to pay for our workbench.

Feel free to send in photos of your kitchen tables or other projects you have done around the station!

Our pride and joy...a custom fire place hearth that sits under our hanging tv. We even placed real logs with flame "Christmas" lights in it. Trust me, this thing almost seems like it kicks off heat!

A reclaimed picnic table and table with solid umbrella were stained/painted for when the weather is nice.

A compartment we removed from the back of the cab is now used as a toolbox on the wall in the bay.

 

Some decals on the windows of the engine

We custom mounted some hand tools in this compartment. Before this, they just sat on the shelf.

Here you can see we mounted some nozzles and the adapters on the wall inside this compartment to organize them.

We made custom magazine racks in each of the restrooms. They also hold up to 4 extra rolls of toilet paper. Notice our literature!

Our station coin for #3 (front)

The back of the station coin for #3

 

 

A custom rack for hanging spare leather radio straps on.

A custom accountability tag board for the shifts that are off and extra tags. Also note the "Greenhouse" Incredible Hulk sticker on the door. The station is LEED certified and therefore known as the "GreenHouse"!

Where has The Fire Critic Been?

8 comments

Here is a little update as to what I have been up to besides the Black Diamond Boots Fire & EMS Blog of the Year contest.

You might have also noticed my lack of posting the past several days. My birthday was on the 28th and I spent the day doing some things I don’t normally get to do. I haven’t taken a break from the web sites like this in a long time! I think I deserved it!

Jayson Anuszkiewicz firing my 357

One of those things was going to the shooting range. Jayson Anuszkiewicz (you try pronouncing it…we call him alphabet), and I went to the local shooting range and shot some ammo. I took my Glock 23, Taurus 357, and Ruger LCP. I hadn’t shot the 357 or LCP yet and hadn’t shot my Glock in several years. Jayson brought his gun (I think it was a Smith and Wesson 40 but I can’t remember). We had fun and I think we fired somewhere around 500 rounds total. It was a blast. I hope to get out to the range a little more often, however it can be an expensive hobby. I am not a huge gun fanatic, but shooting is a blast! Thanks for letting me tag along Jayson!

I also got to go to the Monster Jam at the Roanoke Civic Center. Captain Wines got a hold of some tickets, so Preston and I joined him and the Buckaroo for the evening. I am not a huge fan of Monster trucks. They are loud as hell and you get to breathe a bunch of exhaust, but it is fun to watch. Plus, Preston and the Buckaroo had a blast! I might add that Captain Wines had a good bit of fun as well!

Preston and the Buckaroo at the Monster Jam

Here is another shot of me and Wines. Well technically, I am not in the photo because I am taking it. That is Wines in front of his Dodge in the background. This photo was taken when his truck broke down. Captain Lynn Flora and I sat their with our Chevy’s and watched retired Captain Peters tow the Dodge off…Captain Peters was also driving a Chevy. It felt good, especially since my entire crew at the station drives Ford….

One more update. We are working on the firehouse table at #3. We just got it back from being sanded down….We put the final coat of black paint on the frame and now we have to get busy with the inlays on the top. Here is a shot of it right now. If you have a firehouse table or other custom piece to share…send it in!

I will be back to regular posting once the contest is over! I have plenty of stuff to share and catch up on!

Firefighters Build Custom Kitchen Table for Cimmaron Hills FD

2 comments

Here is another custom kitchen table by and for firefighters. This one is for the firefighters at Cimmaron Hills FD in Colorado.

Visit the Cimmaron Hills FD online here

Driver/Engineer Karl Larsen sent in these pictures of  the table that they built for the station. Some of the specifications are: 5′ x10′ built on 1.5″x1.5″ steel frame. The top is 3×4″ solid oak hard wood with 1/2″ mdf underlayment. The legs are 5″ LDH. The center of the table has 12 outlets, the CHFD lights up red with L.E.D’s when we recieve a call.

The best news is that the table does not need to be can’t be moved to clean as it weighs 703 lbs.

View articles on other Kitchen Tables here

Great job guys! If you want to showcase your kitchen table, send us some pics and information!

FC note: And yes, we are still working on ours at firehouse #3 in Roanoke…you can’t rush perfection!

Life at #3 Fire Prevention, Our Custom Kitchen Table, Working on Thanksgiving, Getting Ready for Christmas, and Life Around the Station

2 comments

Here is an article that I wish I would do more of. It is about my job. I typically don’t write much about what I do or about my crew. I hope to change that in the future.

Yesterday was one of those days when I wished I hadn’t come to work. It was fun, we had some laughs, but it was tiring.

My Captain was sick, so I was riding the seat…At station 5? Mind you, I work at station 3. Engine 3 was put out of service because of training staffing. It is a common theme which has been adopted by my department. Rarely will a piece be out of service for 24 hours, but 18 hours is a different story.

FF Duane Noell showing off his footy pajamas

So there we were, my driver and I, at another station on their engine. The day was spent giving a tour and preparing for a big fire prevention awards event that evening. Nothing too awful bad. It just gets tiring being at a different station and being out of your element and in another.

I must say that the event must have been a blast for the children who would be there receiving awards. Luckily, we were able to leave just before the event started and get our engine back in service at #3.

Thanksgiving

I will be working tomorrow (Thanksgiving Day). We will hopefully watch the parades and enjoy kicking back a little bit. We get to take it easy on Holidays. I will again be riding the seat as my Captain will have the day off on vacation.

If everything goes well, we will be getting a Thanksgiving meal dropped off. If everything goes bad, we will have a contingency plan. I will let you know what plan B is when I figure it out!

Me handing out helmets to the children at the tour today. Yes, I am standing up...And NO, I am not part of the class!

FF Jerry Franks and I at station 5. Notice their custom kitchen table, probably the best in the city until ours is done.

Christmas

The guys on the ambulance got the station all ready for Christmas. The lights are on the firehouse. Sorry, we don’t have a fancy system to set the lights up to flicker to the music. We might put in for one on the next budget cycle.

FF Jason Gardner and FF/PM Eric Mulford installing Christmas Lights on Firehouse #3.

#3′s Custom Kitchen Table

We are working on our kitchen table. This is a year in the works. Basically, we kicked ideas around for almost a year and last cycle we decided to act on those ideas. In the meantime, we have built a run board, refinished and customized a coffee table for the day room, built magazine racks for the bathrooms x3, a board to hold our accountability tags, a rack to hold our radio straps not in use, and a bottle rack for spare bottles. Among other things.

Our company enjoys woodworking and we have had fun setting up shop in the bay to work on this stuff. You never know what is next! I will post more pictures in the future!

The beginning of our custom kitchen table. All glued up and clamped.

What can I say? I work with an exceptional crew and we have a blast. The job gets done, we have fun, and everyone goes home. What more could I ask for? A raise…yeah we haven’t had one of those in 3 years yet everything is getting more and more expensive! We have our jobs still, so that is a plus.

Another Custom Firehouse Kitchen Table. Share Yours With The Fire Critic

1 comment

You might remember I posted about firehouse kitchen tables here. And no, my crew still has not decided on a design for ours. However, we are getting close! We are running out of stuff to customize and build in my firehouse.

Check out this one from Marion County Fire Rescue in Florida. Hell, I just drove through there the other day on the way back from Disney World! I should have stopped by!

Submitted by Lt. James G. Hensley

Attached are a couple of photos of our new dining table.  It was designed and constructed by one of our firefighters here at our station, FF Charles Osvold.  This table is located at Marion County Fire Rescue Station #21 “The Sleepless Knights”, the busiest house in Marion County, Florida.  We are listed in Firehouse magazine as one of the nation’s top 100 busiest stations.  The table measures twelve feet long by four feet wide.  The bases are constructed of two real fire hydrants.  We would be very proud to include our photo in your list of tables.  This table is a symbol of our station pride.  If there is one thing we attempt to achieve each shift, it is to have dinner together.  With our call load this is often difficult.  Our station has a crew of four on Engine 21, two on Rescue 21, and two on Rescue 521.  Total crew size is eight.  Thank you again for considering our photo for your site.

Owning Your Firehouse – The Art of the Custom Firehouse Kitchen Table

5 comments

I know this is big in my department and apparently it is spreading across the nation. The art of the custom firehouse kitchen table. While I am sure that this is something that has been around for a very long time, it is growing in popularity once again.

If you have a customized kitchen table in your firehouse, send me a pic and a little write up and I will post about it!

On a sidenote, Wall Shields is another decent idea for customizing your firehouse and showing off your company pride! maybe a Fire Critic Wall Shield in the future!!! (I have the logo, just let me know guys!)

The station I am working at is defining our design objectives for our table. This is not something that should be taken lightly, nor should it be rushed! Take your time and do it right!

Check out these great tables I have found on the net!

Station 10 has one of the nicest stations inside and out at IFD. The crews here donated their time, effort and money to completely repaint and remodel their large station house. However, maybe the most unique feature is the 10's dinner table. This gigantic table was made from an old bowling alley lane from Chicago. It was refinished and mounted on a unique ladder and diamond-plate base. The final touch is a hand painted and airbrushed flame logo for the Brightwood Brigade. Very sharp!!!

Indianapolis Fire Department Station 10 "Brightwood" From the website: (Click on the picture to go to their website) Station 10 has one of the nicest stations inside and out at IFD. The crews here donated their time, effort and money to completely repaint and remodel their large station house. However, maybe the most unique feature is the 10's dinner table. This gigantic table was made from an old bowling alley lane from Chicago. It was refinished and mounted on a unique ladder and diamond-plate base. The final touch is a hand painted and airbrushed flame logo for the Brightwood Brigade. Very sharp!!! (link)

Houston Fire Department Station 68. This table is extravagant. It features fire hydrants as legs (one painted by each shift). It also features the crews at the station for each shift at the time of the build.

Houston Fire Department Station 68. This table is extravagant. It features fire hydrants as legs (one painted by each shift). It also features the crews at the station for each shift at the time of the build. (link)

This Philly Firehouse Kitchen Table belongs to Engine 20, Ladder 23, and Medic 1 "The House of Dragons"

This Philly Firehouse Kitchen Table belongs to Engine 20, Ladder 23, and Medic 1 "The House of Dragons" (link)

This firehouse kitchen table belongs to FDNY Rescue 1. (link)

This firehouse kitchen table belongs to FDNY Rescue 1. (link)

Arlington (VA) County Fire Station 1. This firehouse kitchen table was (link)

Arlington (VA) County Fire Station 1. This firehouse kitchen table was built by Wall Shields Co.: New to Wall Shields Co. is our Fire House Furnishings line, here is a custom table for Station 1 in Arlington County. It features a sturdy 4x4 frame, inlaid glass tile 1, the station and department patch and topped with a 1/8" of crystal clear epoxy. (link) Check out more of what Wall Shields can do here (Wall Shields Co. web site)

Be sure to send in your photo/info on your firehouse kitchen table to firecritic@firecritic.com!